Local roofersFree to callNo forms to fill out
Serving Flanders and nearby towns
Menu
Call (862) 453-8002
Shingle Roofing

Shingle Roof Installation Flanders, NJ

A new shingle roof in Flanders is a system of layers, and each one has to go on in the right order for the shingles to do their job, whether the roof is on a new home, an addition or a reroof. One call to (862) 453-8002 reaches a nearby roofer who installs shingle roofs.

Shingles are only the top layer of a shingle roof. Below the shingles go metal drip edge, a self-adhering ice barrier at the eaves and valleys, a layer of underlayment and a starter row at the edges. Flashing and attic ventilation round it out, and most leaks on newer roofs come from those details rather than the shingles.

The first decision is the shingle itself. Most new roofs use architectural shingles, which are heavier and longer lasting than the older flat 3-tab style. Impact-resistant shingles rated Class 4 under the UL 2218 test are an option where hail is common, and some insurers treat them differently, so ask yours.

Not every roof can take shingles. Below a 2 in 12 slope, water moves too slowly for shingles, so low sections get a membrane roof instead. Porches and low additions often need a different material where they tie into the main roof.

Many shingle roof installation calls in Flanders also turn up a need for shingle roof replacement or roof installation.

Looking for Flanders shingle roof installation? Call (862) 453-8002 to reach a nearby roofing contractor.

Call now
The process

Building a shingle roof layer by layer

A shingle roof is built from the eaves up, layer over layer.

  1. Start with the deck

    The roof deck, usually plywood or OSB, is checked for soft spots, gaps and protruding nails before anything covers it. Shingles laid on a bad deck show every flaw.

  2. Drip edge at the eaves

    The eaves get drip edge and a band of ice and water shield, and the valleys get a full-length strip. That membrane seals around nails where ice backs water up.

  3. Underlayment rows

    Underlayment covers the deck in shingled rows, and the rake edges get their drip edge after it. Synthetic underlayment is lighter, stronger and less likely to wrinkle than felt.

  4. Starter strip

    The starter row seals the bottom edge and rakes of the roof. Skipping it is a common cause of edge blow-offs.

  5. Shingle the field

    The field is shingled with correct offsets and nailing, with step flashing, kickout flashing and pipe boots set as the courses reach them. Valleys are finished open with metal or closed-cut, depending on the shingle and the roof.

  6. Cap the roof

    The ridge gets a continuous vent and cap shingles, and the soffits are checked for open intake. Balanced airflow keeps the attic cooler and drier and helps the shingles last.

What is included

Parts of a shingle installation

Choosing a shingle

3-tab, architectural or impact-resistant shingles are matched to the house before materials are ordered.

Starter strip

Drip edge and a sealed starter row protect the roof edges for a clean, sealed edge.

Flashing details

Every wall, chimney and pipe gets new flashing, and a ridge vent caps the peak which is where most leaks would otherwise start.

Eave membrane

The lowest edge of the roof gets a sealed membrane where ice dams and runoff hit hardest.

Synthetic underlayment

A synthetic water barrier goes over every sheet of decking as the second line of defense.

Related service

Architectural Shingle Installation Flanders, NJ

Architectural shingles go on over the same deck, underlayment and starter as any shingle, with their own nailing pattern. The double thickness only holds if the nails catch both layers, so placement is checked as the roof goes on. The ridge and hips get thicker cap shingles made for the line, not cut 3-tab pieces.

For Flanders homeowners, architectural shingle installation has become the default for new roofs. They resist wind, add depth to the roofline and outlast flat shingles. Look at a few colors on a nearby roof in daylight before deciding.

Related service

Asphalt Shingle Roof Installation Flanders, NJ

Asphalt shingle roof installation is standard work, but the quality varies a lot from one crew to the next. The shingles rarely fail first; the edges, nails and flashing do. Ask the roofer to explain the nailing pattern, the underlayment and how walls and valleys will be flashed.

For an asphalt shingle roof installation in Flanders, plan for a few days of work on an average house. Cold weather slows the factory sealant, so shingles laid in winter may need hand sealing. The crew will watch the forecast, since wet decking cannot be covered.

Local help

Shingle Roof Installation Near Me

Around Flanders, shingle installation covers new builds, garages, additions and full reroofs. Older homes in Flanders and nearby towns like Budd Lake, Succasunna, Ledgewood and Chester often had felt underlayment and box vents, while new roofs usually get synthetic underlayment, ice barrier at the eaves and a ridge vent, and a shingle chosen for local wind and hail makes sense anywhere storms roll through. Looking for a shingle roofer near me? Ask about the full system, from drip edge to ridge.

Searching for shingle roof installation near me from Flanders or Budd Lake, Succasunna, Ledgewood and Chester? Call (862) 453-8002 to talk to a roofer who works in your part of town.

Roofs in this climate

Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. Most homeowners in Flanders, NJ have the roof checked in the fall and again after the snow melts.

Why call

Why fix it now

Less damage

Small roof problems caught early usually stay small repairs.

Roofers who know Flanders

Roofers in Flanders know the roof types and weather wear common in local homes.

Straight answers

Ask the roofer about the cause, the options and the estimate before work starts.

Shingle Roof Installation questions

How many nails should each shingle have?
Nailing is what holds shingles down until the sealant bonds and long after. Four nails per shingle is common, with six where the shingle instructions or local code call for high-wind nailing. Nails set too high miss the course below, and overdriven nails cut the mat, which is how shingles blow off a new roof.
What is the best season for a shingle roof installation?
Mild, dry weather is the easiest time to install shingles. In cold weather shingles get stiff and the sealant strips need sun to bond, so roofers handle them carefully and often hand seal the edges. Wet decking is the hard stop at any time of year.
What is the difference between 3-tab and architectural shingles?
3-tab shingles are a single flat layer with cutouts, while architectural shingles are two laminated layers. The thicker build gives architectural shingles better wind resistance and a longer life, and many lines no longer offer 3-tab. 3-tab can make sense on outbuildings or when matching an older roof.
What kind of underlayment should go under shingles?
Starting at the deck, a new roof gets drip edge, ice and water shield at the eaves and valleys, underlayment over the rest and a starter strip at the edges. Felt still works, but synthetic is tougher and holds up better if the roof sits open. Check that the shingle instructions and local code are both followed.
How steep does a roof need to be for shingles?
Asphalt shingles need a slope of at least 2 in 12. Low slopes from 2 in 12 up to 4 in 12 need extra underlayment. Flatter sections are roofed with a membrane instead.

More questions? Call (862) 453-8002

Often needed together

  • Shingle Roof Replacement

    Full shingle roof replacement, from tear-off and deck repair to new shingles and flashing, including permits, cleanup and a final check.

    Learn more
  • Roof Installation

    Putting on a new roof the way the material maker intends, whether it is asphalt shingles, metal or another material.

    Learn more
  • Roof Ventilation

    Roof ventilation work that keeps the attic dry in winter and cooler in summer, so shingles and decking last as long as they should.

    Learn more
  • Gutter Installation

    Seamless gutter installation sized to the roof, pitched to the downspouts and hung on hidden hangers, so water ends up where it should.

    Learn more

Looking for something else?

See all roofing services

Get shingle roof installation help in Flanders

Call (862) 453-8002 to talk to a roofer serving Flanders, NJ.

Talk to a local roofer(862) 453-8002Call now

Free to call. No forms to fill out.

Call (862) 453-8002